¡@
|
||||||||||||||||||||||||||||||||||||
|
ELECTRICAL CHARACTERISTICS |
||||||||||||||||
| Working Voltage | 6.3 V to 100 V | 160 V to 450 V | ||||||||||||||
| Operating Temperature | -
40 |
-
25 |
||||||||||||||
| Capacitance Range | 0.47
~ 4,700 |
0.47
~ 220 |
||||||||||||||
| Capacitance Tolerance |
|
|
||||||||||||||
| DC Leakage
Current ( |
0.01CV or
3 |
0.02CV
+ 15 |
||||||||||||||
|
(after 3 minutes application of rate voltage) |
||||||||||||||||
|
Dissipation Factor at 120Hz,
25 |
WV(V) |
6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 100 | 160 | 200 | 250 | 350 | 400 | 450 | |
|
DF(%) |
24 | 20 | 17 | 15 | 12 | 10 | 10 | 8 | 20 | 20 | 20 | 25 | 25 | 25 | ||
For capacitor whose capacitance exceeds 1000uF,
the value of DF(%) is increased by 2% for every additional 1000uF.
¡@
|
Load
Life : 2000 hours with W.V at 105 Capacitance Change : Within 20% of initial value. Dissipation Factor : Not exceed 150% of initial requirement. Leakage Current : Not exceed the initial requirement. ¡@ |
|
Shelf
Life : 500 hours, no voltage applied at 105 |
|
Capacitance Change : Within 20% of initial value. Dissipation Factor : Not exceed 150% of initial requirement. Leakage Current : Not exceed 200% of initial requirement. |
¡@
Supertech copyright 2005.11