class   For interference suppression and across-the -line

  Temp. and Frequency   

   Surge &  I.R.  

  Dimension  

  BACK  

 Introduction 

 ¡@
The capacitors are non-inductively wound with a Metallized Polypropylene film dielectric/electrode, encapsulated in flame retardant (UL94,  V-0) plastic case and epoxy resin end seal. ¡@
 Leads Type 
X-S : Tinned copper clad steel wire radial leads.
X-P : UL 1015 or UL 1017 AWG#20~22 solid PVC insulation wire radial leads.
 Applications 
  Ideal for use in Line bypass antenna coupling, across-the-line and spark killer circuits.

  Available or EMI filter.

  Switching power supply applications.

  Business machines appliances, such as : typewriters, adding machines, computer displays and monitors.

  Household appliances, such as : mixers coffee grinders audio and TV circuits.

  Thyristor and triac appliances, such as : dimmers.

¡@
 Features 

  Provides interference suppression, all safety approval.

  Over voltage stress withstanding.

  Self-healing properties.

  Active and passive lame retardant.

¡@
 General specification 

  Climate category : In accordance with DIN40040 GMF

      a ) G  = minimum Limit temperature : - 40C      

 ¡@  b ) M = maximum Limit temperature : + 100C

      c ) F  = humidity category : average relative humidity 75%, 95% for 30 days per year, continuously:

               85% for the remaining days, occasionally.

  Rated voltage : 250/300VAC, 50~60Hz

  Capacitance range : 0.0047uF ~ 4.7uF

  Capacitance tolerance :  J (5%), K (10%), M (20%)

  Test voltage :

       a ) Between terminals : From 0~1200VAC for 60 sec or 2100VDC for 1~2 sec.

                                            But Discharge Use K 5W/KV up for 1 ~ 5 sec.

       b ) Between terminals and case : 2200VAC, 60Hz 60sec.

   Dissipation factor :

       a ) 0.1% at 1KHz and 20C

       b ) 0.3% at 10KHz and 20C

   Insulation resistance :

       a ) Between terminals : C0.33uF, IR>=30,000M

                                          C>0.33uF, IR>=10,000M/uF

       b ) Between terminals and case :  IR>=30,000M

            Measured at  100 15VDC, 60sec 20C

¡@