class  For interference suppression and across-the -line

  Temp. and Frequency    

  Dimension  

  BACK  
Introduction ¡@

 The capacitors are non-inductively wound with a Metallized Polypropylene film

 dielectric/electrode, encapsulated in flame retardant (UL94,  V-0) plastic case

 and epoxy resin end seal.
Applications

  Ideal for use in Line bypass antenna coupling, across-the-line

     and spark killer circuits.

  Available or EMI filter.
  Switching power supply applications.
  Business machines appliances, such as : typewriters, adding machines, computer displays and monitors.
  Household appliances, such as : mixers coffee grinders audio and TV circuits.
  Thyristor and triac appliances, such as : dimmers.
Features

  Provides interference suppression, all safety approval.
General specification

  Climate category :  In accordance with DIN40040 GMF

      a ) G  = minimum Limit temperature :   - 40C      

 ¡@  b ) M = maximum Limit temperature :   + 100C

      c ) F  = humidity category : average relative humidity 75%, 95% for 30 days per year, continuously:

               85% for the remaining days, occasionally.

  Rated voltage :   250/275VAC, 50~60Hz

  Capacitance range :   0.0047uF ~ 1uF

  Capacitance tolerance :  J (5%), K (10%), M (20%)

 Withstand voltage :    a ) Between terminals :    From 1200VAC for 60 sec or 2100VDC for 1 sec.

                                        b ) Between terminals and case :    2200VAC, 60Hz 60sec.

   Dissipation factor :    a ) 0.1% at 1KHz and 20C

                                        b ) 0.3% at 10KHz and 20C

   Insulation resistance :  a ) Between terminals : C0.33uF, IR>=30,000M

                                                                              C>0.33uF, IR>=10,000M/uF

                                            b ) Between terminals and case :  IR>=30,000M

                                                 Measured at  100 15VDC, 60sec 20C