BACK
 Motor  Common Specifications

1.  Operating Temperature: - 10C ~70C ( ordinary humidity )
2.  Storage Temperature : - 40C ~ 70C  ( ordinary humidity )
3.  Insulation Resistance: 50Mohm at 500VDC
4.  Dielectric Strength : Between lead or terminal and housing 700VAC for 3 sec. or 500VAC for 1min.
5.  Vibration Test : JIS C0040 1.5mm frequency 10~55Hz 1 hour in 3 direction X, Y, Z each.
6.  Shock Test : JIS C0041 gravitational acceleration 100G time 6 sec. in 3 directions X, Y, Z, each.

7.  Life : Ambient temperature 25C and humidity 65%

         o Sleeve Bearing :   30,000 hours

         o Ball Bearing :   50,000 hours
8.  Locked Rotor Protection : 72 hours at rated voltage
9.  Polarity Protection : Reverse connection at the rated voltage will not cause any damage.

10. Insulation Class : E class ( UL : class A )

        o Additional performance requirements can be determined between manufacturer and customer,

                  based on customer's request.

        o Design improvements will be incorporated without prior notice.

        o Storage Terms should not exceed 6 months and fans should not be stored in high humidity area.